There are two methods of wifi hacking using kali linux.

Wifi Hacking kali linux method .

I saw that people are very interested in hacking wifi so today I will tell you how to hack wifi using ink linux.

 The first method . 

If you want to hack Wifi, you need to know about Wifi Technology first! What is this? How does it work? You also need to have an idea about the Wifi device. Today I am going to share with you a method of wifi hacking. You can do this with any PC you want. For this we need: desktop or laptop, ink linux operating system. However, even if your PC is not permanently set up as Kali Linux operating system. In that case, bootable ink will only work if you have a Linux live pen drive or if you have Virtual Box / Vmware set up as a Linux operating system.

Looking at Linux, the network of my router that I have forgotten. However, only the live system does not have any data saved. Now we will open the Fern WiFi Cracker tool from Wireless Attack from the Linux tool menu.

Once opened, you will see the option to select the interface card. Select. Now turn on the access point. Now all you have to do is find the datalist from the database. But you can also take the help of tool box. Now you have to click on the network that you will access from the directed network.

This is where we have to do the important work. If you know the MAC address, you can find out whether it is good or not. If you can't do that, then there is no reason to worry, you just have to select the data file from the data base. Now click on Attack and wait. If the password is weak, it will be accessed immediately.

B.D. You cannot show passwords directly with this tool. It has to be done in other ways. But you can connect. That's enough, isn't it! You must understand why the password will not show. That's why it connects directly.

The tool sometimes confuses between Capital and Small so it doesn't connect much. But with a little ingenuity you will get access. InshaAllah!

The second method .

We will open the terminal first. Then type 'sudo su'. Then I will type 'ifconfig'. Then I will press enter.

Then type 'airmon-ng check kill'. Now press enter.

Now type 'airmon-ng check'. Press Enter again.

Now type 'airmon-ng start wlan0' and press Enter.

Then you will see a BSSID number and which BSFID number of which WiFi, it will be written next to it. Copy the BSSID number of the WiFi you will hack. Now you will see that no extension is coming. Due to which you can't even type anything. So press [Ctrl + C] to bring up the extension. Now type the extension that will come.

'reaver -i wlan0mon -b Paste the previously copied BSSID number here -vv -K 1' then press Enter and your desired WiFi password will be hacked. After a while your desired WiFi password will be written down. To understand what the password is, notice the text 'PSK:'. The password will be written next to 'PSK:'.

Those with desktops will need a Wi-Fi adapter to support their monitoring mode, which is not required on laptops.

Hopefully today's post was very helpful, and if you have any questions about this, you can leave me in the comment box. And you must let us know how you like today's post through comments and try to share this post as much as possible.

And stay tuned to Sabuj Bangla TV YouTube channel for such interesting and amazing, real, information technology related information. So many thanks so far today for bothering to read this post to the end. Hope everybody on this site also had a great day.  Stay  well, stay healthy, stay safe with Sobuz  Bangla Cyber ​​Army . Thanks. God bless you.  

Green  Bangla  TV YouTube Channel Link : -

https://www.youtube.com/channel/UCt2TKd4f6oQrzWh-GASXxPw?pbjreload=102

I saw that people are very interested in hacking wifi so today I will tell you how to hack wifi using ink linux.

 The first method . 

If you want to hack Wifi, you need to know about Wifi Technology first! What is this? How does it work? You also need to have an idea about the Wifi device. Today I am going to share with you a method of wifi hacking. You can do this with any PC you want. For this we need: desktop or laptop, ink linux operating system. However, even if your PC is not permanently set up as Kali Linux operating system. In that case, bootable ink will only work if you have a Linux live pen drive or if you have Virtual Box / Vmware set up as a Linux operating system.

Looking at Linux, the network of my router that I have forgotten. However, only the live system does not have any data saved. Now we will open the Fern WiFi Cracker tool from Wireless Attack from the Linux tool menu.

Once opened, you will see the option to select the interface card. Select. Now turn on the access point. Now all you have to do is find the datalist from the database. But you can also take the help of tool box. Now you have to click on the network that you will access from the directed network.

This is where we have to do the important work. If you know the MAC address, you can find out whether it is good or not. If you can't do that, then there is no reason to worry, you just have to select the data file from the data base. Now click on Attack and wait. If the password is weak, it will be accessed immediately.

B.D. You cannot show passwords directly with this tool. It has to be done in other ways. But you can connect. That's enough, isn't it! You must understand why the password will not show. That's why it connects directly.

The tool sometimes confuses between Capital and Small so it doesn't connect much. But with a little ingenuity you will get access. InshaAllah!

The second method .

We will open the terminal first. Then type 'sudo su'. Then I will type 'ifconfig'. Then I will press enter.

Then type 'airmon-ng check kill'. Now press enter.

Now type 'airmon-ng check'. Press Enter again.

Now type 'airmon-ng start wlan0' and press Enter.

Then you will see a BSSID number and which BSFID number of which WiFi, it will be written next to it. Copy the BSSID number of the WiFi you will hack. Now you will see that no extension is coming. Due to which you can't even type anything. So press [Ctrl + C] to bring up the extension. Now type the extension that will come.

'reaver -i wlan0mon -b Paste the previously copied BSSID number here -vv -K 1' then press Enter and your desired WiFi password will be hacked. After a while your desired WiFi password will be written down. To understand what the password is, notice the text 'PSK:'. The password will be written next to 'PSK:'.

Those with desktops will need a Wi-Fi adapter to support their monitoring mode, which is not required on laptops.

Hopefully today's post was very helpful, and if you have any questions about this, you can leave me in the comment box. And you must let us know how you like today's post through comments and try to share this post as much as possible.

And stay tuned to Sabuj Bangla TV YouTube channel for such interesting and amazing, real, information technology related information. So many thanks so far today for bothering to read this post to the end. Hope everybody on this site also had a great day.  Stay  well, stay healthy, stay safe with Sobuz  Bangla Cyber ​​Army . Thanks. God bless you.  

Green  Bangla  TV YouTube Channel Link : -

https://www.youtube.com/channel/UCt2TKd4f6oQrzWh-GASXxPw?pbjreload=102

I saw that people are very interested in hacking wifi so today I will tell you how to hack wifi using ink linux.

 The first method . 

If you want to hack Wifi, you need to know about Wifi Technology first! What is this? How does it work? You also need to have an idea about the Wifi device. Today I am going to share with you a method of wifi hacking. You can do this with any PC you want. For this we need: desktop or laptop, ink linux operating system. However, even if your PC is not permanently set up as Kali Linux operating system. In that case, bootable ink will only work if you have a Linux live pen drive or if you have Virtual Box / Vmware set up as a Linux operating system.

Looking at Linux, the network of my router that I have forgotten. However, only the live system does not have any data saved. Now we will open the Fern WiFi Cracker tool from Wireless Attack from the Linux tool menu.

Once opened, you will see the option to select the interface card. Select. Now turn on the access point. Now all you have to do is find the datalist from the database. But you can also take the help of tool box. Now you have to click on the network that you will access from the directed network.

This is where we have to do the important work. If you know the MAC address, you can find out whether it is good or not. If you can't do that, then there is no reason to worry, you just have to select the data file from the data base. Now click on Attack and wait. If the password is weak, it will be accessed immediately.

B.D. You cannot show passwords directly with this tool. It has to be done in other ways. But you can connect. That's enough, isn't it! You must understand why the password will not show. That's why it connects directly.

The tool sometimes confuses between Capital and Small so it doesn't connect much. But with a little ingenuity you will get access. InshaAllah!

The second method .

We will open the terminal first. Then type 'sudo su'. Then I will type 'ifconfig'. Then I will press enter.

Then type 'airmon-ng check kill'. Now press enter.

Now type 'airmon-ng check'. Press Enter again.

Now type 'airmon-ng start wlan0' and press Enter.

Then you will see a BSSID number and which BSFID number of which WiFi, it will be written next to it. Copy the BSSID number of the WiFi you will hack. Now you will see that no extension is coming. Due to which you can't even type anything. So press [Ctrl + C] to bring up the extension. Now type the extension that will come.

'reaver -i wlan0mon -b Paste the previously copied BSSID number here -vv -K 1' then press Enter and your desired WiFi password will be hacked. After a while your desired WiFi password will be written down. To understand what the password is, notice the text 'PSK:'. The password will be written next to 'PSK:'.

Those with desktops will need a Wi-Fi adapter to support their monitoring mode, which is not required on laptops.

Hopefully today's post was very helpful, and if you have any questions about this, you can leave me in the comment box. And you must let us know how you like today's post through comments and try to share this post as much as possible.

And stay tuned to Sabuj Bangla TV YouTube channel for such interesting and amazing, real, information technology related information. So many thanks so far today for bothering to read this post to the end. Hope everybody on this site also had a great day.  Stay  well, stay healthy, stay safe with Sobuz  Bangla Cyber ​​Army . Thanks. God bless you.  

Green  Bangla  TV YouTube Channel Link : -

https://www.youtube.com/channel/UCt2TKd4f6oQrzWh-GASXxPw?pbjreload=102